Making a blinking belt with Arduino Micro, Altoids box, LED and some code: This project had many ups and downs, sadly ending in a down. My greatest strength caused my demise since my aesthetically pleasing container, the Altoids box, is conductor and my LEDs, connected to the side, failed to blink properly. Even though my […]
On Adafruit Learning System there are a lot of cool tutorials and this particular one is based on the Arduino Micro used to upcycles old Next keyboards: Ladyada and pt had an old NeXT keyboard with a strong desire to get it running on a modern computer. These keyboards are durable, super clicky, and very satisfying to use! […]
Bicolor square heart/valentines necklace is a project made with Arduino Micro by Dr_Speed who shared some photos and code on the Adafruit Forums! heart_bmp[] = { B01101100, B11111110, B11111110, B11111110, B11111110, B01111100, B00111000, B00010000}, I use a micro, but just about anything will do. There’s some Sugru on there to keep the sharp bits from catching on […]
John Thomson managed to build a pressure sensor to behave like a switch, when it’s in an idle state the LED is off, if you apply some pressure, light goes on: The pressure pad doesn’t just work straight out the box – it requires a little bit of craft. What I’ve done is sandwich a pressure […]
Steve Yoshida is a systems engineer and worked on a project involving Arduino Micro and Infrared remote adapter: My new Arduino sat on the shelf for a few weeks before I came up with a quick project that I wanted to use it for. I use XBMC a lot on both PC and Raspberry Pi and […]
Adafruit + Arduino Micro and GPS powered LED Speedometer v1.0 by xykobas3rd on Instagram:
Martin Atkins built this great LED matrix clock using an Arduino Micro, a few bicolor LED matrix displays, display drivers, and a real time clock module Chronodot: Finally found some time today to solder the parts onto my first OSH Park PCB. The primary motivation for this was to learn Eagle and try out OSH Park, so I wanted to make […]
Adafruit Forum member JoshuaKane writes: I wanted to share with everyone a project I worked on for a recent sci-fi/comic convention. I have always been a fan of fantasy, sci-fi and comics. A few months ago I started working on an Orbital Drop Shock Trooper (ODST) costume and weapon. I wanted to make the […]
Dhavalis lives in Surat (India) and grew up watching Sci-Fi and Super Hero Movies which made him believe that technology can overcome human weaknesses. He wrote us to share Netra (it means “eye” in Sanskrit), a project done during his second year of undergraduate engineering studies: Netra is an eye for visually impaired, a device based on […]
How to enhance performance in gaming from an engineering point of view? dekuNukem created a hands-free finder built using Arduino Micro to accomplish the task of chaining fishes at full speed and without fail at a touch of a button: The fishing keeps going without human input until a shiny shows up, at which point it stops and […]
Learn how to submit your project made with Arduino boards, it may get featured on the Arduino social channels!
Submit your Project
