Bigger isn’t always better, as illustrated nicely by this device from YouTuber “Volos Projects.” It’s not only physically quite small, squeezing an Arduino into a 40x25x25mm aluminum enclosure, but uses an interface consisting of a single button (plus a power switch). Data output is handled via a similarly tiny 64×48 pixel OLED display. Regardless of […]
In the build shown below, Evan McMahon dares to ask the question, “Have you ever been disappointed by a mood ring?” While that might seem a bit random, the answer is a likely “yes” if you’ve ever worn one with the expectation of any sort of accuracy. Fortunately, he didn’t just pose the question, but […]
As first reported by the Des Moines Register, this year 14-year-old Josiah Davenport decided to animate 3,500 Christmas lights on his family’s home with the help of an Arduino Mega. The lighting pattern is synchronized with the Trans-Siberian Orchestra’s “Wizards in Winter,” which passersby can listen to by tuning in to 89.5 FM on their […]
It’s that time of year again, when many the world over chop down a tree, then insert it into some sort of water dish to keep it green for a month or longer. This normally works out well, but means that someone has to keep it hydrated, climbing under sharp branches to intermittently check the […]
You may have come across the term “PID control,” and while this proportional-integral-derivative control method does a great job of smoothing out oscillations, where does one get started? One solution would be Mr Innovative’s demo device, showcased in the video below. In it, a DC gear motor is able to smoothly rotate an arrow overlaid […]
While we don’t normally think of typing on a computer as a dangerous job, the U.S. Department of Labor reports that workers spend 25,000 hours away from work due to repetitive strain injuries, such as using a computer. Part of this could be due to the fact that the average computer user applies two to seven […]
Aseen here, Bit by Jonghong Park at the University of the Arts Bremen is a beautiful visualization of how everything is linked together using the Markov chain principle. This installation uses an Arduino Mega for control, rotating arms that hold a pair of microswitches around coaxial gear-shaped cylinders. In the sequence, one arm turns, then lobes on these […]
Of course Styrofoam floats on water, but have you ever seen it float in midair? That’s exactly what Julius Kramer’s 3D-printed acoustic levitator does, using an array of 72 40kHz ultrasonic transducers to form standing waves of low and high pressure. When turned on, he’s able to simply insert a tiny foam ball which hovers […]
Omni wheels are devices that look like wheels with extra rollers positioned along their circumference. This allows robots to move forwards and backwards, as well as slide and spin depending on how the wheels are powered. Maker Jeremy S. Cook decided to create his own version, and after some consideration and careful design work, constructed […]
Chris Lovett used a cheap remote plug to control his Christmas lights; however, when the fob’s A53G 12V battery died, he decided to go a different direction. Rather than just replace the battery, he hooked up an Arduino Leonardo for complete lighting automation. For this hack, he bypassed the onboard IC and instead sent a […]
Learn how to submit your project made with Arduino boards, it may get featured on the Arduino social channels!
Submit your Project
