As part of the National Robotics Week coverage of iheartrobotics, the Vibratron: […]the newest member of the RobOrchestra. This amazing musician was built by club members with a total budget of $1000. The Vibratron uses an Arduino Mega to control 30 individual solenoid gates which drop steel balls onto the vibration keys. Using the Arduino […]
This is an art project born as the collaboration between Varvara Guljajeva and Mar Canet. During the last couple of years they have been collaborating in the creation of several interactive installations, some of them containing Arduino boards. The Rythm of City is about to be presented in the following weeks at the Czec Festival […]
A step-by-step guide on controlling physical things (like grabbing candies with a mechanical arm) via Internet (please, try!). In this instructable you will learn how to connect to your arduino and control it over the net, set up a video stream, and how to control stuff with your arduino all in realtime. I’ll try to […]
[pabloxid] shared an Hexapod project on the forum based on an Arduino MEGA 1280 and 18 Dynamixel AX-12 motors: SAMSA is based on the Wiring board, with an ATmega128 microcontroller, and SAMSA II on the Arduino Mega, with an ATmega1280. Both are pretty similar, tough the ATmega1280 has 8 KB SRAM, twice the ATmega128. For […]
Everybody’s amazed about the incredible things done with Kinect and Processing + Arduino. Tutorial need! This is a project in development for the module “Digital Ecologies”, at the Bartlett’s Adaptive Architecture and Computation MSc. – University College London A Delta-Robot is controlled by a Kinect through Processing and Arduino. The movements of the performer control […]
Nice post from the latest Hackaton in Malmo Hackerspace: For the Hackathon event last weekend, we wanted to build a robot and decided to go for a kiwi-drive. The kiwi-drive is a three wheel drive configurations that use special wheels to achieve omnidirectional movement. The robot was designed in Corel Draw (that’s what the laser […]
[scolton] made a nice self-balaced vehicle based on two DeWalt cordless drills and an Arduino Nano: Segstick is a self-balancing…well, literally some kind of broomstick I found in the MITERS workshop. It is powered direct by two DeWalt cordless drills chucked to two 6″ wheels. The controller is an Arduino. Additional supporting devices include an Inertial […]
Squirt is an autonomous robot which can communicate with an Android phone. Optionally, the phone can be used as a controller to drive the robot. Squirt’s purpose is to water plants and chase away raccoons. It’s also a technology demonstration to prove the feasibility of using a smart phone to control small irrigation and well […]
Squirt is an autonomous robot which can communicate with an Android phone. Optionally, the phone can be used as a controller to drive the robot. Squirt’s purpose is to water plants and chase away raccoons. It’s also a technology demonstration to prove the feasibility of using a smart phone to control small irrigation and well […]
Here are our last post about Mozilla Drumbeat Festival. We wanted to give back to the community what we’ve been doing in the Arduino Playground: Mozduino! Here are our last post about Mozilla Drumbeat Festival. We wanted to give back to the community what we’ve been doing in the Arduino Playground: Mozduino! […]
Learn how to submit your project made with Arduino boards, it may get featured on the Arduino social channels!
Submit your Project
