Blog Home

Arduino-based machine makes cutting and stripping wires easy

Arduino TeamDecember 9th, 2020

If you need to strip a wire or two, that’s easy enough. However, what if you need tens or hundreds of wires stripped to the exact same length? Such a task would quickly become tedious, but with Mr Innovative’s Arduino Nano-based machine all you have to do it pop in a few numbers and it takes care of the rest!

The automated device uses a 3D printer-like stepper mechanism to feed wire though a flexible length of tubing, which comes out on the other side positioned under a wire stripper. A servo is employed to aim the tubing and wire at either the cutting or stripping portion of the tool, which clamps down via a stepper and linkage setup. User interface consists of a 2.8″ touchscreen, allowing one to define the wire and stripped lengths, as well as how many individual wires are required.

Boards:Nano
Categories:Arduino

4 Responses to “Arduino-based machine makes cutting and stripping wires easy”

  1. (deleted) Says:

    (deleted)

  2. luvtrk Says:

    Where can I get the plans for this?

  3. raddevus Says:

    This is a fantastic project. Well done. Can you tell me what that software is that you use to generate the screens for the touch screen? Thanks for sharing this great project.

  4. Strooom Says:

    @raddevus : looking at the 4 wire connector, I think it is a Nextion display. It comes with a pc software to design the screens and talks over serial with the MCU.

Leave a Reply

You must be logged in with your Arduino account to post a comment.