Blog Home

Arduino found in Mexico CitySe encontró un Arduino en México DF

dcuartiellesJune 6th, 2010

I was looking for some motors for the courses I run with kids here in Mexico City. There is a street downtown where it is possible to find a couple of shops selling components, from resistors to pushbuttons with embedded 12V lamps. I was in the need of a couple of servo motors, as well as some DC ones with gearboxes to prototype the robots I am building for a forthcoming workshop later in July.

I found more or less everything I wanted, I was lacking some processors. I like to use ATmega8 processors, since the things I am designing are not in the need of a lot of intelligence, just moving motors back and forth, read some LDRs and eventually get commands over an old remote control. While searching for them, I was reminded about the sad truth, here in Mexico Atmel is making a poor job introducing its technology and it is more or less impossible to get a microprocessor at fairly big distributors like e.g. AG Electronica. The only thing I could find was the ATmega8L (at the mentioned AG), while I could get everything else I needed at other places (5V regulators, battery connectors, 28-pin DIP sockets, MOS-FETs…)

 

Arduino seen in Mexico

2010, D. Cuartielles, Arduino seen in Mexico

When I thought everything was lost, I found a place called Electrónica Estudio, where Eng. Wilfrido González happens to both run a consultancy business, a shop, and a workshop space. This shop, located at Rep. del Salvador, 20, #504, happens to import a lot of gear from Sparkfun, Pololu, and others. Believe it or not, inside one of the displays, Wilfrido is selling Arduino boards packed in small plastic bags. Dude, this was quite and experience! Seeing Arduino as very normal products at a completely unexpected location in the middle of one of the busiest streets in Mexico City is indeed a great experience as a designer.

Anyway, from now on, if you need to buy Arduino boards, accelerometers, gears, motors, MP3 players, you can go visit Wilfrido, I am sure he will help you out. You can check his website here, please note that, at the time of writing this post, he hadn’t introduced Arduino on his website, yet.

 

Iba buscando unos motores para los cursos que estoy impartiendo para niños/as aquí en México DF. Hay una calle en el centro dónde encontrar un par de tiendas que venden componentes, de resistencias a botones con lámparas de 12V embebidas. Necesitaba un par de servo motores, así como unos motores de continua con engranajes para prototipar los robots que estoy creando para un taller en el FARO de Oriente más adelante, durante el mes de Julio.

Encontré, más o menos, todo lo que necesitaba, si bien me faltaban los microcontroladores. Me gusta usar procesadores ATmega8, ya que lo que estoy diseñando no necesita de mucha inteligencia, sólo mover un par de motores, leer unas LDRs y, posiblemente, recibir comandos vía un mando de control remoto reciclado. Mientras los buscaba, me asaltó el hecho de que acá en México Atmel no está haciendo un gran trabajo introduciendo su tecnología, por lo que es casí imposible encontrar sus micros en distribuidores de tamaño mediano-grande como, por ejemplo, AG Electrónica. Lo único que pude encontrar fue el ATmega8L (en AG), además compré el resto de componentes que necesitaba en otros sitios (reguladores de 5V, conectores de batería, conectores DIP de 28 pines, MOSFETs…)

Arduino seen in Mexico

2010, D. Cuartielles, Arduino visto en Mexico

Cuando empezaba a pensar que todo estaba perdido, encontré una tienda llamada Electrónica Estudio, dónde el Ingeniero Wilfrido González lleva su consultoría, su tienda, y tu espacio para talleres. Esta tienda, se encuentra localizada en Rep. del Salvador, 20, #504, e importa materiales de Sparkfun, Pololu y otros. Lo creas o no, dentro de uno de los mostradores de cristal, Wilfrido vende placas Arduino embaladas en pequeñas bolsas de plástico. Ver Arduinos cómo si de cualquier producto se tratase en un lugar inesperado como este en una de las calles más transitadas del DF es una gran experiencia como diseñador.

En cualquier caso, de ahora en adelante, si necesitas placas, acelerómetros, engranajes, motores, reproductores MP3, puedes ir a visitar a Wilfrido. Estoy seguro de que te echará una mano. Puedes visitar aquí su página web, ten encuenta que al tiempo de escribir este artículo, él aún no había anunciado ahí las placas Arduino.

Categories:Travels

9 Responses to “Arduino found in Mexico CitySe encontró un Arduino en México DF”

  1. atomsfat Says:

    And how much it cost ?, time ago I also try to bought a ATmega8 in AG electronica but they doesn’t shell.

  2. dcuartielles Says:

    AG sells the ATmega8L, which can be bootloaded with the old bootloader for the lilypad that works with the internal 8MHz oscillator.

    On the other hand, Electronica Estudio has a price-list in the form of a spreadsheet to be found at this link: http://www.electronicaestudio.com/docs/Lista_de_Precios.xls

  3. punkrockid Says:

    wow, nice article
    I’m working on robotics at college and sometimes is difficult to find a place to buy stuff like this, AG Electronica doesn’t always have what you want ¬¬

  4. chipandruck Says:

    Buuuut. Electronica Estudio seems to be very expensive…

  5. dcuartielles Says:

    chipandruck: Well, in Mexico, like in many other Latinamerican countries, electronics are always imported from abroad and are subject to a fairly high tax import rate, for not mentioning the currency exchange fluctuations. Putting things in context, Electronica Studio is playing the game as any others. It is the only distributor at Mexico DF as for today both of Arduino boards and Sparkfun products. If there were more, I am sure the prices would probably drop a little. when it comes to the Arduino boards, I am sure it is worth using ES to get just one board. If you want small parts there in Mexico, you just need to walk down the street where ES is located and look for the best dealer. I found LEDs for as little as 0.80 Pesos Q1, remote controls for my projects for 30 Pesos Q1 -including batteries-, DC motors with gears for 70 Pesos Q1 … those prices are hard to find back in the EU.

  6. lm24 Says:

    Hola
    Cuanto cuesta el curso y en donde esta?

  7. dcuartielles Says:

    Hola,

    los cursos que he ofrecido en Mexico DF hasta ahora han sido todos de caracter gratuito al estar subvencionados por el Centro Cultural de España en México (http://ccemx.org). En el futuro espero que haya más cursos ofrecidos por los distribuidores o por otra gente y no descarto que no estén exentos de coste.

    En cualquier caso, si tienes interés ponte en contacto directamente con nuestro distribuidor local.

  8. Mauricio Says:

    pues acá están listados todos los distribuidores por país http://arduino.cc/en/Main/Buy

  9. José Luis Chapa Says:

    Buscando arduino encontré una página en México que vende las arduino, creo se llama teensyduino la placa y es un add-on para arduino. Y el precio resultó bastante bajo la página es: http://www.comunidadatmel.com y tiene vídeos donde muestra cómo usarla. Espero les sirva, salu2

Leave a Reply

You must be logged in with your Arduino account to post a comment.