Archive for the ‘Intel Galileo’ Category

Build a Touchscreen Controlled Marionette with Intel Galileo

Saturday, February 14th, 2015

image00

Making gets really interesting and fun especially when mixing laser cut shapes, servo motor, tft screen, MDF, plexiglass and Intel Galileo Gen 2. After you assemble the parts and follow the steps of this tutorial, you’ll be able to control the puppet through an interface on the screen. Enjoy the tutorial!

We are going to have a little fun with the Intel® Galileo development board. This time around, we’ll make a simple puppet control system. We’ve put together a “running robot” marionette with a simple mechanism that uses a continuous servo. We’ll be use a touchscreen interface to control various outputs using sliders and switches.

As always, you can modify the designs to suit your needs. We will teach you how to incorporate touchscreens, and make the interface necessary for controlling the Intel® Galileo Gen 2 board.

Just so you know, the instructions this time around are quite long. That’s due to the assembly of the marionette. I would review the assembly instructions fully before attempting to put it together. While it looks long and complicated, if you group the parts, it much simpler.

So, let’s start the puppet show!

Follow the link and start making!

marionette

A step-by-step tutorial for Intel Galileo: getting started with Mac OS X

Friday, December 6th, 2013

Intel Galieo

Today we start the first of a series of monthly blogposts dedicated to Intel Galileo. Stefano Guglielmetti, who’s already blogged about the Arduino Yún some time ago, shared with us his tutorial about how to get started with the Arduino Certified board.

—————————————-

IMPORTANT: Connect your Intel Galileo to the 5V power supply before any other connection or you will damage the board.

During the Maker Faire Rome, I was lucky to get an Intel Galileo. But when I had to use it, it was suddenly clear that it’s not as straightforward as Arduino. I had to resort to desperate measures and do something that really only a very restricted class of noble people do, I had to read the manual. (more…)

Please enter a valid email to subscribe

Confirm your email address

We need to confirm your email address.
To complete the subscription, please click the link in the email we just sent you.

Thank you for subscribing!

Arduino
via Egeo 16
Torino, 10131
Italy